Learning Tools Talingcagra to Improve the Result Learning Clothing Manufacturing Custom Made Subject

  • Jayaul Khoiriyah SMK Negeri 2 Gedangsari, Gunungkidul, Daerah Istimewa Yogyakarta,  Indonesia

Abstract

To get the result pressing Custom Made clothing that are neat, slippery and smooth generally used seam roll and tailor’s ham, but because the price is relatively expensive making the tool not buyable. Therefore, an innovation was made to make Alja Talingcagra (learning tools for pillows, bolsters, patchwork, and teak wood grajen. Talingcagra is an equipment in the form of small pillows and bolsters made of patchwork and teak wood grajen. This tool used to ironing open seam allowance on the sewing and to ironing on the shaped area to be leveled, so produce clothing pressing that are neat, slippery and smooth. Generally the succes of practice of making custom made clothes is supported by practical tools (learning tools). The purpose of writing this best practice is to improve the learning result of custom made clothing practice for pressing material. The steps to make Talingcagra is to (1) Make pattern, (2) Cut the material, (3) Sewing pillowcases, (4) Fill the bloster pillow with patchwork and teak wood grajen, and (5) Ffinishing. The result learning before used Talingcagra with the highest score 85, the lowest score 50, class average 70,45 and KKM achievement percentage 29,03%. After the students used Talingcagra get the highest score 95, the lowests score 65, and the class average 80,25 and the KKM achievement persentage 83,87. Therefore, Talingcagra can improve the competence of making custom made clothing in pressing material.

Keywords: learning tools talingcagra, learning result, clothing manufaacturing custom made

PDF Downloads

Download data is not yet available.

Author Biography

Jayaul Khoiriyah, SMK Negeri 2 Gedangsari, Gunungkidul, Daerah Istimewa Yogyakarta

Jayaul Khoiriyah, S.Pd. Perempuan kelahiran Klaten 20 November 1977. Tinggal di Dowo RT 01/04, Banyuripan, Bayat, Klaten, Jawa Tengah. Pendidikan S1 Jurusan Pendidikan Kesejahteraan Keluarga -Tata Busana.  Bekerja di SMK Negeri 2 Gedangsari, Gunungkidul, Daerah Istimewa Yogyakarta. Mengajar program studi Tata Busana. Motto Hidup “Man Jadda Wa Jadda-Siapa yang bersungguh-sunggu pasti ia akan berhasil”.

Published
2022-05-01
How to Cite:
Khoiriyah, J. (2022). Learning Tools Talingcagra to Improve the Result Learning Clothing Manufacturing Custom Made Subject. Ideguru: Jurnal Karya Ilmiah Guru, 7(2), 131-138. https://doi.org/10.51169/ideguru.v7i2.351
Section
Best Practices
Abstract viewed: 148 times
PDF (Bahasa Indonesia) downloaded: 145 times

References

Agustin Rinartati. (2018). Pembuatan Busana Custom Made Kelas XII Tata Busana Semester I dan II. School of Fashion & garment Production. Centino.

Agustin Rinartati, Heni Mustofani. (2018). Teknologi Menjahit. School of Fashion & garment Production. Centino.

Ani Nugrahani. (2020). Pembuatan Pola (C2) Kelas X. PT Kuantum Buku Sejahtera.

Baruno, A. (2021). Modifikasi Laminar sebagai Alat Pembelajaran Biologi SMA Materi Mikroorganisme. Ideguru: Jurnal Karya Ilmiah Guru, 6(1), 44-49. DOI: https://doi.org/10.51169/ideguru.v6i1.203

Goet Poespo. 2009. Tailoring membuat blazer dalam 1 hari. Kanisius.

Karya & Susilo. (2012). Pemanfaatan Limbah Kain Perca untuk Pembuatan Furnitur. Jurnal Tingkat Sarjana Seni Rupa dan Desain, 1-5.

Leli Walidah. (2020). Pembuatan Busana Custom Made (C3) Kelas XII. PT Kuantum Buku Sejahtera.

Peraturan menteri pendidikan nasional nomor 35 tahun 2010 tentang petunjuk teknis pelaksanaan jabatan fungsional guru dan angka kreditnya.

Peraturan Pemerintah Republik Indonesia nomor 4 tahun 2022 tentang perubahan atas peraturan pemerintah nomor 57 tahun 2021 tentang standar nasional Pendidikan.

Rani Septiawati, Aci Murhad, Dina Dinata, Reni A, Winda S & Febrianty. (2018). Pemanfaatan Limbah Kain Perca sebagai Alternatif Peluang Usaha. Jurnal STIE Dewantara, 1-8.

Rayandra Asyhar. (2012). Kreatif Mengembangkan Media Pembelajaran. Jakarta: Referensi Jakarta.

Romza Baher. Ikwal Citra Ramadhan. (2013). Alat pendidikan, alat pembelajaran, metode pemilihan alat pendidikan, perdedaan alat pendidikan dan alat pembelajaran. Diakses dari https://www.slideshare.net/romzabaher1/alat-pembelajaran. Dilihat pada 1 Oktober 2019.

Sugatri, M. (2021). Peranan Siniar sebagai Media Pembelajaran Sosiologi di Masa Pandemi. Ideguru: Jurnal Karya Ilmiah Guru, 6(1), 58-66. DOI: https://doi.org/10.51169/ideguru.v6i1.219

Uswatun Khasanah (2021). Pengembangan BOLU BAPER sebagai alat peraga pembelajaran kimia berbasis Adiwiyata. Journal of Educational Chemistry (JEC), volume 3. nomor 2. Retrieved from: https://journal.walisongo.ac.id/index.php/jec.